-- *****************************************************************************
-- Juniper-PPPoE-CONF
--
-- SNMP Agent Capabilities definitions for the PPPoE MIB.
--
-- Copyright (c) 2001, 2002 Unisphere Networks, Inc.
-- Copyright (c) 2002, 2003 Juniper Networks, Inc.
-- All rights reserved.
-- *****************************************************************************Juniper-PPPoE-CONF DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITYFROM SNMPv2-SMI
AGENT-CAPABILITIESFROM SNMPv2-CONF
juniAgents
FROM Juniper-Agents;juniPppoeAgent MODULE-IDENTITYLAST-UPDATED"200508032058Z"-- 03-Aug-05 04:58 PM EDTORGANIZATION"Juniper Networks, Inc."CONTACT-INFO" Juniper Networks, Inc.
Postal: 10 Technology Park Drive
Westford, MA 01886-3146
USA
Tel: +1 978 589 5800
E-mail: mib@Juniper.net"DESCRIPTION"The agent capabilities definitions for the point-to-point protocol over
Ethernet (PPPoE) component of the SNMP agent in JUNOSe family of
products."-- Revision HistoryREVISION"200508032058Z"-- 03-Aug-05 04:58 PM EDT - JUNOSe 7.2DESCRIPTION
"Added Interface Lockout configuration and state support."REVISION"200507131140Z"-- 13-Jul-05 11:40 AM EDT - JUNOSe 7.0.1DESCRIPTION"Added MTU control object."REVISION"200406142048Z"-- 14-Jun-04 03:48 PM EDT - JUNOSe 7.0DESCRIPTION"Added PADR Remote Circuit Id Capture support."REVISION"200303101848Z"-- 10-Mar-03 01:48 PM EST - JUNOSe 5.1DESCRIPTION"Replaced invalid session counter with separate PADI and PADR invalid
session counters.
Added invalid length and invalid tag length counters.
Added ServiceName table support."REVISION"200212231941Z"-- 23-Dec-02 02:41 PM EST - JUNOSe 5.0DESCRIPTION"Replaced Unisphere names with Juniper names."REVISION"200210011837Z"-- 01-Oct-02 02:37 PM EDT - JUNOSe 4.1DESCRIPTION"Added PADN counter."REVISION"200208191514Z"-- 19-Aug-02 11:14 AM EDT - JUNOSe 4.0DESCRIPTION
"Added PADI flag support."REVISION"200106191427Z"-- 14-May-02 06:38 PM EST - JUNOSe 3.2.3DESCRIPTION"Added AC-NAME and duplicate MAC address indicator objects."REVISION"200104021921Z"-- 02-Apr-01 03:21 PM EDT - JUNOSe 3.2DESCRIPTION"The initial release of this management information module."::={ juniAgents 33}-- *****************************************************************************
-- PPPoE SNMP Agent Capabilities definitions
-- *****************************************************************************juniPppoeAgentV1 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 1 of the PPPoE component of the JUNOSe SNMP agent. This
version of the PPPoE component was supported in JUNOSe 3.0 thru 3.2.2
system releases."STATUSobsoleteDESCRIPTION"The MIB supported by the SNMP agent for the PPPoE application in
JUNOSe. These capabilities became obsolete when AC-NAME and duplicate
MAC address indicator objects were added."SUPPORTS Juniper-PPPOE-MIB
INCLUDES{
juniPPPoEGroup2,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup }::={ juniPppoeAgent 1}juniPppoeAgentV2 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 2 of the PPPoE component of the JUNOSe SNMP agent. This
version of the PPPoE component was supported in JUNOSe 3.2.3 through 3.x
system releases."STATUSobsoleteDESCRIPTION"The MIB supported by the SNMP agent for the PPPoE application in
JUNOSe. These capabilities became obsolete when PADI flag support was
added."SUPPORTS Juniper-PPPOE-MIB
INCLUDES{
juniPPPoEGroup3,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup }::={ juniPppoeAgent 2}juniPppoeAgentV3 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 3 of the PPPoE component of the JUNOSe SNMP agent. This
version of the PPPoE component was supported in JUNOSe 4.0 system
releases."STATUSobsolete
DESCRIPTION"The MIB supported by the SNMP agent for the PPPoE application in the
JUNOSe. These capabilities became obsolete when PADN counter support
was added."SUPPORTS Juniper-PPPOE-MIB
INCLUDES{
juniPPPoEGroup4,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup }::={ juniPppoeAgent 3}juniPppoeAgentV4 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 4 of the PPPoE component of the JUNOSe SNMP agent. This
version of the PPPoE component was supported in JUNOSe 4.1 through 5.0
system releases."STATUSobsoleteDESCRIPTION"The MIB supported by the SNMP agent for the PPPoE application in
JUNOSe. These capabilities became obsolete when the invalid session
counter was replaced by separate PADI and PADR invalid session counters,
invalid length and invalid tag length counters and service name table
support were added."SUPPORTS Juniper-PPPOE-MIB
INCLUDES{
juniPPPoEGroup5,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup }::={ juniPppoeAgent 4}juniPppoeAgentV5 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 5 of the PPPoE component of the JUNOSe SNMP agent. This
version of the PPPoE component was supported in JUNOSe 5.1 through 7.0
system releases."STATUSobsoleteDESCRIPTION"The MIB supported by the SNMP agent for the PPPoE application in
JUNOSe. These capabilities became obsolete when PADR remote-circuit-id
field was added."SUPPORTS Juniper-PPPOE-MIB
INCLUDES{
juniPPPoEGroup6,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup }::={ juniPppoeAgent 5}juniPppoeAgentV6 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 6 of the PPPoE component of the JUNOSe SNMP agent. This
version of the PPPoE component is supported in JUNOSe 7.0 system
release."STATUSobsolete
DESCRIPTION"The MIB supported by the SNMP agent for the PPPoE application in
JUNOSe. These capabilities became obsolete when MTU configuration
was added."SUPPORTS Juniper-PPPOE-MIB
INCLUDES{
juniPPPoEGroup7,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup }::={ juniPppoeAgent 6}juniPppoeAgentV7 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 7 of the PPPoE component of the JUNOSe SNMP agent. This
version of the PPPoE component is supported in JUNOSe 7.0.1 through 7.1
system releases."STATUSobsoleteDESCRIPTION"The MIB supported by the SNMP agent for the PPPoE application in
JUNOSe. These capabilities became obsolete when lockout configuration
was added."SUPPORTS Juniper-PPPOE-MIB
INCLUDES{
juniPPPoEGroup8,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup }
::={ juniPppoeAgent 7}juniPppoeAgentV8 AGENT-CAPABILITIESPRODUCT-RELEASE"Version 8 of the PPPoE component of the JUNOSe SNMP agent. This
version of the PPPoE component is supported in JUNOSe 7.2 and subsequent
system releases."STATUScurrentDESCRIPTION"The MIB supported by the SNMP agent for the PPPoE application in
JUNOSe."SUPPORTS Juniper-PPPOE-MIB
INCLUDES{
juniPPPoEGroup9,
juniPPPoESubIfGroup2,
juniPPPoESummaryGroup,
juniPPPoEServiceNameTableGroup,
juniPPPoELockoutTableGroup }::={ juniPppoeAgent 8}END